Tug Tractor and Belt Loader Parts Specials
Call us toll free at 877-Sage-877
Order on line use eSage. Just click on the shopping cart.
|
|
Shifters For Tug Tractors and Belt Loaders
|
|
T6-1002-151
|
Shifter Control Assembly - Forward/Neutral/Reverse
|
Call
|
|
|
|
660-4-0732-7
|
Shifter (Dual) Control assembly - Throttle Control and Forward/Neutral/Reverse
|
$285.95
|
|
|
The T6-1002-151 is used on Tug model MA series and also used on Tiger models TIG 40, 50, and 60 Tractors
The 660-4-0732-7 is used on the Tug model 660 and 660E Belt Loader
|
|
|
|
Conveyor Rollers for Tug Belt Loaders
|
|
660-600-0422
|
Conveyor Roller
|
$7.99
|
|
|
Used on Tug models 660 and 660E Belt Loaders and Cochran Western CKC600
|
|
|
Belt Loader Bumpers... Fit Tug and Charlatte Belt Loaders
|
|
|
660301201
|
Bumper, Round 34 x 5 x 7 Inch
|
$59.95
|
|
|
This 34 in x 7 in bumper is designed to fit either the Tug or Charlatte Belt Loader. Replaces P/N 660-3012-01 or 5020203
|
|
|
|
Axle Hub For Tug MA and M1 Tractors
|
|
|
T6-2001-606
|
Axle Hub
|
Fits Tug MA and M1
|
$179.99
|
|
|
This is used on Tug MA series S/N 4020 and higher, Tug M1 and M1A, and Tiger TIG 40, 50, and 60 Tractors
|
|
|
|
Brake Rotor For Tug MA and M1 Tractors
|
|
T6-2001-605
|
Tug Brake Rotor
|
$69.99
|
|
|
This is used on Tug MA series S/N 4020 and higher, the Tug M1 and M1A and Tiger TIG 40, 50, and 60 Tractors
|
|
|
|
RAMPTECH Steering Sector For Tug MA
|
|
T6-5001-101
|
Tug MA Steering Sector
|
Call For Price
|
|
|
This steering sector is used on Tug MA Tractors. RAMPTECH Engineered for the Ramp.
|
|
|
Red Hawk Starter Motors for the Ford 300
These Are New Without a Core Charge.
|
|
|
|
3180
|
$59
|
No Core Charge
|
|
|
This starter motor is a high torque version of the original Ford starter and requires a remote mounted solenoid to actuate it.
|
|
|
|
3205
|
$59
|
No Core Charge
|
|
|
This starter is the late model Ford Permanent Magnet replacement, most often known as Ford P/N E9SZ-11002B. This starter has a solenoid mounted on it, not requiring a remote mounted solenoid.
|
|
|
Switch to a better switch. Reduce starter motor failure, flywheel damage, and switch failure. Upgrade to the new improved ignition switch now!
|
|
|
Upgrade to the new improved ignition switch now. Reduce starter motor replacement and flywheel replacement. This switch will reduce maintenance and repair costs.
This new ignition switch contains silver contacts and stainless steel components for enhanced service outside wet conditions.
|
|
743012
|
$24.99
|
|
|
This is a direct replacement for FMC 515-8762 and HES-0082, TLD Lantis 024609 and SC40110, Wollard 2-3500, Tug T6-7010-140 and 956-3124, Cole Hersee 956-3124, and most other keyless ignition switches.
Contact Customer Service for additional information
|
|
|
|
|
RampTech Fuel Gauge For TUG MA
|
|
G110
|
Fuel Gauge
|
$41.00
|
|
|
|
This part is the same as part number P/N T6-6007-103
|
|
|
|
RampTech E Brake Lever For TUG MA
|
|
96688
|
Brake Lever
|
$39.99
|
|
|
|
This part replaces Tug T6-8005-101, Harlan 27002, or Orscheln 1041805 and 02182900
|
|
The RampTech E Brake Lever is an improved version of the Orscheln lever originally used as on the Tug MA. This new lever is designed for ramp and GSE use and will last longer. Click here for additional details.
|
|
|
|
|
Engine Governor... For Tugs and Belt Loaders
|
|
T6-1001-105
|
Governor
|
Call For Price
|
|
|
This is the governor that is used on the Ford 300 Engine
|
|
|
|
|
RedHawk Ignition Module TUG MA and 660 Belt Loader
|
|
743060
|
Ignition Module
|
$29.99
|
|
|
|
This part is the same as part number P/N T67003105, Ford E8PF12A199AA, or the Motorcraft DY184
|
|
|
|
RAMPTECH High Efficiency Copper Brass Radiators Copper For
Tug MA & MH Tractors and Tug 660 Belt Loaders
|
|
|
RAMPTECH radiators are made from copper and brass for maximum durability on the ramp. Copper and brass radiators have a higher heat conduction rating than aluminum, so it is without question the best cooling cores and fins material. Tests have shown that of similar core designs, it proves conclusively that aluminum radiators offer no real temperature drop advantage over copper and brass. Results have shown that core design has more bearing on temperature drop than the material (copper- brass vs. aluminum). Given the same thickness of material, aluminum radiators do have a higher strength and can sustain more physical abuse, however, to match the cooling efficiency of copper and brass aluminum radiators must use a thinner wall and more cores. To achieve this, the required physical size would have to increase for the same cooling effect. That would therefore require a significant increase in size. Additionally, copper and brass radiators can be repaired more easily, with less specialized equipment, and at more locations than aluminum. Copper and brass simply offer the best overall advantage.
|
|
Comparison of Aluminum vs Copper Brass Radiators
|
|
T6-4055-203HE
|
Radiator, Copper Brass
|
High Efficiency Version
|
$359.99
|
|
|
These radiators fit the Tug MA and MH Series Tractors and the Tug Belt Loader with a gas engine and replaces Tug part number T6-4055-203
|
|
RAMPTECH. Engineered for the Ramp.
|
|
|
Radiator for Toyota Tractors
This radiator is the RampTech aftermarket version of the Toyota radiator. It is an exact replacement, equal in quality, but at a fraction of the cost. Why pay more?
|
|
16410-43630-71
|
Radiator, Copper Brass Toyota TD Series Tractors
|
Toyota Replacement
|
$359.99
|
|
|
|
King Pin Sets - Nylon or Bronze For Tug Tractor Axles
|
|
|
King Pin Sets for Tug Front Axles. Available with Nylon or Bronze Bushings
|
|
T6-3001-183K
|
King Pin Set - Nylon Bushing
|
$46.85
|
|
|
T6-3001-183KB
|
King Pin Set - Bronze Bushing
|
$46.85
|
|
|
The T6-3001-183K and T6-3001-183KB are used on Tug MA series with Ford 300 engine, Tug MA series with Perkins Diesel, Northwestern model 6003-D with Onan engine, Jetline or Equi-Tech models M40-50, and Tiger models TIG 40, 50, & 60 tractors.
|
|
|
RAMPTECH Steer Knuckles For Tug Belt Loaders
|
|
|
|
|
|
660410501L
|
Knuckle, Steer Left
|
$225.00
|
|
|
660410501R
|
Knuckle, Steer Right
|
$225.00
|
|
|
|
RAMPTECH Cables for Tug Tractors and Belt Loaders
|
|
|
TM118182
|
Shifter Cable - M1 and M1A Tugs
|
$34.99
|
|
|
T6-1009-105
|
Accelerator Cable - This is used on Tug models MA series with Ford engine and Perkins Diesel.
|
$39.99
|
|
|
T6-1023-105
|
Transmission Shift Cable used on the Tug MA series with Ford 300 engine and Perkins Diesel with the Ford C6 transmission. Also used on the Clark model CT120.
|
$29.99
|
|
|
660-11-115
|
Accelerator Cable - Tug 660 and 600E Belt Loader using the Ford 300 engine.
|
$34.99
|
|
|
Sage Parts carries a full line of RAMPTECH cables for all makes of GSE.
RAMPTECH. Engineered for the Ramp.
|
|
|
|
Seats for Tug Tractors and Belt Loaders
|
|
|
|
|
|
|
WM682 Seat
|
The WM682 is used on Tug model GT-1628 Pushback Tractor, Clark Baggage Tractor model CT & DT-25 series and other general applications
|
$55.99
|
|
|
4100101A Seat
|
The 4100101A Seat is used on Tug model M1 and M1A tractors, the Tug 660 & 660E Beltloaders, and Clark models CT and DT series tractors.
|
$99.99
|
|
|
T6-4013-103 Bench Seat Back
|
The T6-4013-101 is the Bench Seat Back that is used on Tug model MA series and Tiger models TIG 40, 50, and 60 tractors.
|
$49.95
|
|
|
T6-4013-101 Bench Seat Cushion
|
The T6-4013-103 is the Bench Seat Cushion that is used on Tug model MA series and Tiger models TIG 40, 50, and 60 tractors.
|
$49.95
|
|
|
Sage Parts carries seats for all types and brands of equipment
|
|
|
|
Emergency Stop Switch for Tug Belt Loaders
|
|
660-2149-6
|
Emergency Stop Switch
|
$79
|
|
|
This Emergency Stop Switch is used on Tug model 660 and 660E Belt Loaders
|
|
|
Tie Rod Ends for Tractors, Belt Loaders, Trailers, and Dollies
|
|
|
ES150R
|
Fits Tug MA, MH, M3, and the Northwestern Model 100
|
$17.95
|
|
|
ES150L
|
Fits Tug MA, MH, M3, and the Northwestern Model 100
|
$17.95
|
|
|
ES416R
|
Fits Tug MA, MH, M3, and the Northwestern Model 100
|
$6.95
|
|
|
ES416L
|
Fits Tug MA, MH, M3, and the Northwestern Model 100
|
$6.95
|
|
|
|
Axle Parts For Tug Tractors
|
|
|
OEM Axle Shafts for Tug MA Tractors
|
|
T6-2001-603
|
Short Axle Shaft
|
Call for Price
|
|
|
T6-2001-604
|
Long Axle Shaft
|
Call for Price
|
|
|
This is used on Tug MA series units S/N 4020 and higher for Jetline or Equi-Tech Models M40 and M50
|
|
|
Shock Mounts For Tug Tractors
|
|
|
T6-4020-115
|
Shock Mount
|
Fits Tug MA and MH-50 and all Tiger series tractors
|
$4.95
|
|
|
|
|
New Red Hawk Brake Booster For TUG MA
These Are NEW UNITS With NO CORE CHARGE
|
|
|
$59.00
|
|
|
This part is the same as part number P/N T6-8007-101 and A1 Cardone P/N 54-74000, but unlike the A1 Cardone, this is a new unit and no core is required
|
|
|
|
Leaf Springs for Tug Tractors
|
|
|
T6-4039-101
|
Leaf Spring, 4 Leaf Type
|
$73.99
|
|
|
The T6-4039-101 is used on Tug Model MA Series Tractors
|
|
|
|
E-Hitch for Tug MA Series Tractors
|
|
T6-4014-103
|
E Hitch
|
$89.95
|
|
|
This hitch is used on Tug MA all series and Tug M3 Tractors
|
|
|
RAMPTECH Exhaust Pipes and Mufflers for
Tug Tractors and Belt Loaders
|
|
|
|
|
|
|
660-111-35
|
Tail Pipe for Tug 660 Belt Loader with Ford 300 Engine
|
$19.97
|
|
|
T6-1005-133
|
Exhaust Pipe for Tug MA S/N 0362 and higher
|
$17.72
|
|
|
T6-1005-131S
|
Tail Pipe used on Tug MA with Ford 300 Engine S/N 0362 and higher
|
$20.95
|
|
|
T6-1005-105
|
Muffler
|
$19.95
|
|
|
|
Wire Harness For Tug MA
|
|
|
Sage Parts has replacement wire harnesses for Tug MA Tractors. We can also provide custom designs and product improvements.
The harness shown here is a custom design that eliminates the gauges from the dash and moves the hour meter to the engine compartment.
|
|
Call For Price
|
|
|
 |
| Prices and availability are subject to change without notice. The prices listed are for items shipped directly from Sage Parts warehouses located in the United States. All prices shown are in United States dollars. If a product is not in stock when you place your order, we will do our best to let you know and to let you know when we anticipate the product will be available. Anticipated delivery dates are dependent upon vendor supplies and other factors and are subject to change. Please read our Terms and Conditions carefully. The Trademarks shown on this web site may be registered trademarks of their respective companies. |
|
